ALTOM GLASS FACADE SYSTEMS - SPACE AND COMFORT

This segment-based curtain walling system is intended for execution of individual facilities, in case of which time-efficiency of the assembly and elimination of external scaffolding during the erection are among basic requirements.

• The construction of the MB-SE75 façade comprises segments mounted to the bearing construction of the building, joined with each other. The process of prefabrication of elements takes place in a production plant, which significantly enhances the quality of the final product.
• The technological concept adopted in this case results in a number of fundamental benefits of this solution: the assembly time at the building site is significantly shorter compared to a traditional mullion – transom façades, due to the application of complete glazed segments; the costs of erection are also reduced due to the total elimination of external scaffolding.
• The system of segment-based façade also meets the strictest technical and aesthetic requirements. The development performed in this system features visible profiles of the width of 75 mm with a narrow 9 mm expansion gap between individual segments.

See the catalog with the full offer of facade cladding

This segment-based curtain walling system is intended for execution of individual facilities, in case of which time-efficiency of the assembly and elimination of external scaffolding during the erection are among basic requirements.

• The construction of the MB-SE75 façade comprises segments mounted to the bearing construction of the building, joined with each other. The process of prefabrication of elements takes place in a production plant, which significantly enhances the quality of the final product. The technological concept adopted in this case results in a number of fundamental benefits of this solution: the assembly time at the building site is significantly shorter compared to a traditional mullion – transom façades, due to the application of complete glazed segments; the costs of erection are also reduced due to the total elimination of external scaffolding.
• The system of segment-based façade also meets the strictest technical and aesthetic requirements. The development performed in this system features visible profiles of the width of 75 mm with a narrow 9 mm expansion gap between individual segments.

See the catalog with the full range of MB-SR50N systems

The MB-SG50 system gives the possibility to construct and produce light weight curtain walls of hanging and filling types, roofs, skylights and other structures designed for application in buildings of the general use.

• The supporting structure of the MB-SG50 system is based on a mullion/transom aluminium frame of the profile width equal to 50 mm. Transoms are mounted to the mullions with the overlay method, which enables application of different ways of mounting. Special attention should be given to the aesthetic and lightness of the construction: the distance between the in-fills is equal to 16 mm, while the noticeable width of the profiles from the inside is equal to only 85 mm. Due to the similar structure of the mullions and the transoms, the appearance of the wall which is achieved from the inside is identical with the MB-SG50 profile system. This results in the possibility to install both walls side by side in the building. This compatibility is also reflected in the application of identical or similar accessories destined for connecting and mounting the individual elements, what significantly reduces the construction costs.
• This system gives the possibility to secure mechanically the external glass panels along the whole surface and at set points, or at the corners of the set according to individual requirements. A very important feature of the MB-SG50 system is also the side mounting of the aluminium frames, which enables installing of opaque panels in solid brick wall.

See the catalog with the full range of MB-SG50 systems

Conserving energy by reducing exposure to direct solar radiation while allowing for natural day lighting is one of a major focus of today’s environmentally aware engineers, architects and specifiers. MB SUNPROF Sun Shades have been designed to meet these needs. The system comprises aluminum blades, which are available in variety of sizes and integrate the Aluprof’s curtain wall systems range, providing an impressive visual effect that helps unite the building envelope.

• reduction of direct solar heat whilst remaining natural light rate coming inside the building
• lowered use of energy required to operate electric ventilation and air conditioning systems
• optimization of natural ventilation
• Features and benefits:
  - selection of aluminum blade profiles of width from 100 to 300 mm to serve variety of projects’ requirements
  - range of outriggers (brackets) to choose from
  - up to 45 degrees incident angle
  - brings together solar glare control with the appropriate amount of natural light coming into the building’s internal environment

See the catalog with the full range of facade blinds

The mullion-transom system MB-SR50N EI is intended for the construction and execution of light fire resistant curtain and filling walls of the fire resistance class EI15, EI30, EI45, EI60 according to the standards PN-EN 1364-3 and PN-EN 1364-1

• • The construction of the system is based on the load-bearing grid structure composed of vertical members (mullions) and horizontal members (transoms) of box-shape section and characteristic width 50 mm. The profiles of mullions and transoms are suitably connected with each other and form an aluminium grid structure, which is mounted to the building construction with suitable brackets.
• • In order to obtain fireproof aluminium profiles, mullions and transoms have been equipped with special fireproof inserts. A fireproof insert consists of a special-shape aluminium profile, fulfilling the function of reinforcement, shielded with panels made from fireproof materials.

See the catalog with the full offer of the MB-SR50N EL system

The MB-SR50N HI+ mullion and transom façade system has been designed to construct lightweight curtain walls of a hanging and filling type as well as roofs, skylights and other spatial constructions.

• This system allows façades to be constructed with visible narrow dividing lines while ensuring the durability and strength of the structure. The wide offer of profiles enables the architects and designers to realise even the most enterprising ideas for aluminium and glass structures.
• • To obtain the optimum thermal and acoustic insulation and facilitate mounting in the MB-SR50N HI+ system façade, the PE insulator was used, as it provides a very good thermal insulation ((Uf) from 0,59 W/m2K) and its shape ensures proper screw driving when glazing the façade.
• • As regards the opening elements in “HI”-type façades with improved thermal insulation, the use of windows and doors with improved thermal insulation in MB-86 Aero system is especially recommended.

See the catalog with the full offer of the MB-SR50N HI + system